I have a GE 90-30 CPU 374 PLUS. The program currently has a PID controller that controls a valve. I would like to add a second PID controller to control fans. However I am having a problem implementing the 2nd PID controller. When I upload the program and run it, all the parameters are constantly changing. The P,I and D gains fluctuate, upper/lower clamps, etc are changing. The original controller still functions properly. Moreover, if I remove the old controller (mixing valve) and run it, the new fan controller now runs fine. I ensured that the controllers each have enough reserved memory (40 words). Has anyone had any similar problem?